Raspberry pi robot project | How to build your first robot with Raspberry Pi?

🎁 Join my free community: https://www.skool.com/pi-mastery-3626...

Want to build your first robot with a Raspberry Pi? I got you!

⚡Join newsletter → https://tally.so/r/w5EeNv

📊 The tool I use for YouTube research & growth → https://vidiq.com/raspberrypi

Learn how to build your own Raspberry Pi robot using the CamJam EduKit 3! In this beginner-friendly DIY robotics tutorial, you'll transform a simple cardboard box, a Raspberry Pi Zero W, and basic electronics into a fully-functional smart robot—no soldering or 3D printing required!

This step-by-step guide walks you through everything from assembling the chassis and wiring motors, to programming your robot with Python to drive, follow lines, avoid obstacles, and even perform a fun dance routine.

────────────────────────────
🛠 PARTS LIST
(affiliate links — I may earn a small commission at no extra cost to you)

Raspberry Pi Zero 2 W → https://amzn.to/3S7nZhi
5V/2.5A Micro-USB Power Supply → https://amzn.to/4odP7JT
microSD Card (A1, 16–64GB) → https://amzn.to/3ZfS9Tq
USB 3.0 microSD Card Reader → https://amzn.to/43b8mv7
Mini-HDMI → HDMI Cable → https://amzn.to/4m40B0x
Micro-USB OTG Adapter / Powered USB Hub → https://amzn.to/4nAwzT8
(Optional) 40-Pin Header → https://amzn.to/43OW23U
(Optional) Camera Adapter Cable (22-pin Zero ↔ 15-pin standard) → https://amzn.to/3JFmrKH
(Optional) Small Heatsink → https://amzn.to/3LnB066

🔑 Essential talking points:

Unboxing and setting up CamJam EduKit 3

Wiring DC motors and sensors (IR line sensor & ultrasonic sensor)

Raspberry Pi Zero W setup and GitHub code integration

Basic motor control and PWM speed adjustments

Programming line following and obstacle avoidance behaviours

Creating a bonus dance sequence with Python scripting

⏰ Video Timestamps:
00:00 - Intro: Build a Smart Robot with Raspberry Pi
00:19 - Unboxing CamJam EduKit 3 & Project Overview
01:48 - Additional Components Needed
02:11 - Preparing the Cardboard Chassis
02:34 - Cloning GitHub Repo & Wiring Motors
04:01 - Wiring Motor Controller Board
04:49 - Testing Motor Setup
06:18 - Coding Basic Driving Movements
06:39 - Adding IR Line Follower
08:11 - Motor Speed Control with PWM
09:23 - Wiring & Coding Ultrasonic Distance Sensor
11:09 - Line Following Script
12:57 - Obstacle Avoidance Script
14:52 - Bonus: Robot Dance Routine
16:29 - Troubleshooting Common Issues
17:13 - Project Recap & Next Steps

💬 Join our community
👉 https://tally.so/r/w5EeNv

🔔 Subscribe for more Raspberry Pi robotics projects:
Don't forget to subscribe and hit the notification bell for more DIY robotics, electronics, and Raspberry Pi tutorials!

⚠️ Disclaimer:
The results and performance demonstrated in this video are based on careful execution of instructions. Individual results may vary depending on the accuracy of setup and quality of components used. Always follow proper safety precautions when handling electronic components and sharp tools.

💬 Join our community for more tips, support, and project ideas:
Ready to master PI? Join our free community at https://www.skool.com/pi-mastery-3626/about
👉 https://tally.so/r/w5EeNv

Check out this link for troubleshooting: https://tally.so/r/w4yODY

🔔 Subscribe for more Raspberry Pi robotics projects:
Don't forget to subscribe and hit the notification bell for more DIY robotics, electronics, and Raspberry Pi tutorials!

⚠️ Disclaimer:
The results and performance demonstrated in this video are based on careful execution of instructions. Individual results may vary depending on the accuracy of setup and quality of components used. Always follow proper safety precautions when handling electronic components and sharp tools.